- For ceramic wall and floor tiles, rustic and quarry tiles,and natural stone
- For interior and exterior use
- Joints widths: 5 - 20 mm
- Provides a rustic, coarse grained joint
Products
-
-
PlaneMix 90 PlusSemi-dry screeding mortar
-
PlaneMix S40Pool and concrete repair mortar
-
PlaneMix 80Fast-track screeding mortar
-
PlaneMix 80 cementRapid setting cement for screeds
-
PlaneMix 100Fast-setting screeding mortar
-
PlaneMix 100 cementFast-setting screeding mortar
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
-
-
TopCoat DesignUltra matt topcoat for levelled industrial looking floors
-
PlaneMix S8 rapidStand firm universal filler
-
PlaneMix 10Self-levelling and smoothing compound
-
PlaneMix S12 rapidSlump-free smoothing and repair mortar
-
PlaneMix 20Self-levelling and smoothing compound
-
PlaneMix 25 exteriorSelf-levelling and smoothing compound. Interior and exterior use
-
PlaneMix 30Self-levelling and smoothing compound
-
PlaneMix 50Self-levelling compound
-
PlaneMix 50 less dustDust reduced self-levelling compound
-
PlaneMix 60Self-levelling fibre-reinforced smoothing compound
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
Accessories for Alfix PlaneMix
-
-
-
1K sealing membrane
-
2K sealing membrane
-
Sealing Primer
-
Waterproofing membrane Pro
-
Epoxy Membrane
-
Thixotropic agentAdditive for Alfix Epoxy Membrane and Epoxy Primer
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
Epoxy Primer 10 kg2-componenet epoxy primer
-
Tanking accessories
-
-
-
ProFix PlusFlexible dust reduced tile adhesive
- Up to 1200 x 1200 mm -
ProFixFlexible tile adhesive - Light
-
LetFix PlusFlexible low-dust tile adhesive – Light
- Up to 600 x 600 mm -
LetFix UniversalFlexible tile adhesive - Light
-
CombiQuickFixRapid setting flexible tile adhesive
-
QuickFix premiumRapid-setting natural stone adhesive
-
FlexFixRapid-setting flexible natural stone adhesive
-
CombiFixFlexible tile adhesive
-
NormalFixTile adhesive
-
FlexBinder
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
ReadyFlexReady mixed tile adhesive
-
Thixotropic agentAdditive for Alfix Epoxy Membrane and Epoxy Primer
-
Montagelim1-component all-round mounting adhesive
-
EpoxyFuge 20Acid-resistant tile adhesive and grout
-
C2 Epoxy - DISCONTINUED, replaced by EpoxyFuge 20Acid-resistant grout and tile adhesive
-
LetFix less dust - DISCONTINUED - replaced by LetFix PlusFlexible dust reduced tile adhesive - Light
-
LetFix - DISCONTINUED - replaced by LetFix PlusFlexible tile adhesive - Light
-
-
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
Epoxy Primer 10 kg2-componenet epoxy primer
-
Sealing Primer
-
FlexBinder
-
-
-
FineFuge - CeraFill 5Fine grout
-
QuickFuge - Premium 8Rapid-setting natural stone grout
-
UniversalFuge - CeraFill 10Universal grout
-
IndustryFuge - CeraFill 18High-strength grout
-
RustiqFuge - CeraFill 20Wide joint grout
-
M-SiliconHighly elastic sealant
-
EpoxyFuge 20Acid-resistant tile adhesive and grout
-
C2 Epoxy - DISCONTINUED, replaced by EpoxyFuge 20Acid-resistant grout and tile adhesive
-
EpoxyFuge 10252-component flexible, epoxy-based pool grout
-
Montagelim1-component all-round mounting adhesive
-
-
-
DuraPuds 615Water repellent plinth render
-
DuraPuds 650 rapidRapid-hardening repair and levelling render
-
DuraPuds 703Through coloured thin coat finishing mortar
-
DuraPuds 710Thin coat bonding mortar
-
DuraPuds 804Flexible, through-coloured thin coat finishing mortar
-
DuraPuds 810Flexible fibre render
-
DuraPuds 830Flexible facade adhesive - Light
-
DuraPuds 800 SRSilicone resin-based facade render
-
DuraDec 8000 SRSilicone resin-based facade paint
-
Accessories for DuraPuds
-
RustiqFuge - CeraFill 20
Wide joint grout
Calculate
Retailers
Retailers
Product information
Product
Cement-based powder containing polymer modifiers. Added light stable pigments. Contains quartz sand with grain sizes up to 1.0 mm.
Coverage
1.7 - 2.6 kg per m² depending on tile size and joint width.
Packaging
Available in 5 kg and 20 kg PE lined paper bags.
Technical data
- Working temperature
- +5°C - +25°C
- Krav för godkända våtrum +10° C.
- Density
- 2.1 kg/litre (mixed with water)
- Working time
- 1 - 2 hours at +20°C
- Foot traffic
- After 24 hours at +20°C
- Full strength
- After 14 days at +20°C
- Classification - DS/EN 13888
- CG 2 W A, high class
- Shelf life
- Min. 12 months in unopened bags
General information
Joints should be clean, dry, and free from loose particles. Joint depth should appear uniform.
For grouting with joint width under 5 mm Alfix FineFuge - Cerafill 5 or Alfix UniversalFuge - CeraFill 10 colour is recommended.
Underfloor heating, ventilation, waste heat recovery systems, dehumidifiers, etc should be switched off during tiling. Deactivate all installations 72 hours prior to grouting and reactivate 14 days after completion of work at the earliest. Underfloor heating temperature increase should be by 5°C per 24 hours until preferred surface temperature is obtained.
Inlet temperature should be max. +35°C
Colours
Available in pale grey and grey
Colour swatches available on request.
Application
How to use
Usually, grouting can be made 48 hours after completion of fixing. Add 0.20 litres of clean water per kg powder. Pour the water into a clean container and add the powder while stirring thoroughly with mixing drill until a lump-free and smooth grout is obtained. Allow the mixture to rest for a few minutes before use.
Apply Alfix RustiqFuge - CeraFill 20 to the surface with a soft rubber squeegee while working diagonally over the joints ensuring that they are completely filled. Remove excess grout immediately while working.
When the grout begins to set, after approx. 15 – 50 minutes, start to slurry off the area using wet sponge frequently rinsed in clean water. Wipe over tiles in broad sweeps until joints appear even and filled. Finally, clean off and finish tiles and joints with only slightly damp sponge.
Any remaining grout film on the surface can be removed after 12 – 24 hours using an acid cleaner, e.g. Alfix Acid Wash.
NB!
Switch off any underfloor heating.
Note that the temperature of mixing water will influence setting time.
Protect the joints from heat, draught, and other climatic conditions which will cause premature drying. To prevent premature drying, dampen joints for approx. 24 hours in order to obtain complete hardening.
Do not cover areas just grouted with plastic foil or sheets. Avoid any significant changes in temperature or humidity during hardening process.
Variations in drying conditions as well as heavy use of water when cleaning off may affect the cement and cause visible deviations in joint colour.
Cleaning
Grout residues on tiles and tools should be removed with water before the mix begins to set. Cement-based products harden when mixed with water, hence do not pour surplus adhesive into the drain system.