Frontpage Products Tile grouts UniversalFuge - CeraFill 10

UniversalFuge - CeraFill 10

Universal grout

For ceramic and quarry tiles, mosaics, and natural stone
For both moderately absorbent and non-absorbent tiles
Joints widths: 2 - 10 mm
Bright and intense colours
Water and dirt repellent
High mechanical strength and flexibility
For interior and exterior use
Provides an even and uniform surface
Smooth consistency

Product calculator

IMPROVED UNIVERSAL GROUT CHANGES NAME

Calculate

Retailers

Product information

Product

Cement-based powder containing polymer modifiers. Added light stable pigments. Contains quartz sand with grain sizes up to 0.4 mm.

Coverage

0.5 - 1.5 kg per m² depending on tile size and joint width.

Packaging

Available in 5 kg and 20 kg PE lined paper bags

Unit	Colour	Item No.
5 kg	White	4505
5 kg	Grey	4045
5 kg	Pale grey	4515
5 kg	Manhattan Steelgrey	4525
5 kg	Graphite	4535
5 kg	Anthracite grey	4565
5 kg	Black grey	4545
5 kg	Light beige	4555

Unit	Colour	Item No.
20 kg	White	4501
20 kg	Grey	4041
20 kg	Pale grey	4511
20 kg	Manhattan Steelgrey	4521
20 kg	Graphite	4531
20 kg	Anthracite grey	4561
20 kg	Black grey	4541
20 kg	Light beige	4551

Tests

DS/EN 13888

Technical data

Working temperature
- +5°C - +25°C
Density
- 2.0 kg/litre (mixed with water)
Working time
- 1 - 2 hours at +20°C
Foot traffic
- After 24 hours vid +20°C
Full strength
- After 14 days at +20°C
Classification - DS/EN 13888
- CG 2 W A, high class
Shelf life
- Min. 12 months in unopened bags

Technical enquiries

Folderen: “Fliser og fuger – Rengøring og pleje med Alfix”
Alfix Rense/plejemiddelserie
Produktinfo for:
Alfix FineFuge - CeraFill 5
Alfix QuickFuge Premium 8
Alfix IndustryFuge - CeraFill 18
Alfix RustiqFuge - CeraFill 20
Alfix Syr a’
Sikkerhedsdatablad

General information

For moderately absorbent and non-absorbent ceramic and quarry tiles, mosaics, and natural stone.
Grouting can usually be made 48 hours after tiling has been completed. Joints should be clean, dry, free
from dust and loose particles from adhesive and bedding mortar Joint depth should appear uniform.

For grouting of certain types of receptive tiles, such as matt glazed or porous tiles, stains and excess grout can be very difficult to remove. In case of doubt, it is recommendable to do a trial application on a limited and less visible area to ascertain resistance.
Switch off any underfloor heating 3 days before tiling and do not re-connect until 14 days after completion.
Underfloor heating, ventilation, waste heat recovery systems, dehumidifiers, etc should be switched off during tiling. Deactivate all installations 72 hours prior to grouting and reactivate 14 days after completion of work at the earliest. Underfloor heating temperature increase should be by 5°C per 24 hours until preferred surface temperature is obtained.
Inlet temperature should be max. +35°C

Final appearance

Finished joints should be evenly filled and the colour should appear uniform.
The following conditions may affect the natural properties of the cement and cause colour differences:

Early cleaning with wet sponge may lighten the colour. This phenomenon is most likely to occur in case of dark colours.
Remedy: Clean off with acidic cleaner, such as Alfix Acid Wash.
Rapid drying may brighten the colour and produce a weak joint.
Remedy:Keep the surface damp for optimum hydration of the grout. Wet with damp sponge.
Repairs or visible seams after working breaks may cause colour differences.
Remedy: Remove the joints mechanically and re-grout the area. Wipe over and clean off the tiles several times with slightly damp sponge.
Moist from substrate and uneven absorption from tile edges may cause a locally darker colour. Remedy:Wash the area several times with a mixture of soap flakes and water.

Colours

Available in white, grey (unpigmented), pale grey, Manhattan steel grey, graphite, anthracite, black grey, and light beige. Colour swatches available on request.

Application

Downloads

UniversalFuge - CeraFill 10

Product

Coverage

Packaging

Tests

Technical data

Technical enquiries

General information

Final appearance

Colours

How to use

Cleaning

Guidance

Downloads

Product Info

Grout colours

EMICODE

EPD

Material Safety Data Sheet